7 Ft Realistic Artificial Christmas Tree Gwinnett 100

03/16/2012

Reply To This Listing

Shandoah Pine 7ft Christmas Tree:

Realistic Artificial Christmas Tree

Takes about 15 minutes to put it together. Can store it any where. Looks actually like a real xmas tree. Never pay for a tree again.
Beautiful Tree in excellent condition.

A tree with theses features can run you any where from $200 up.

http://www.genfoam.com/productsales/products/christmas/index.cfm

Assembly Instructions:

Set your tree close to a wall outlet.

1. Unfold the legs of the tree stand and lay the stand in a flat area. Then slide the locking circular disc downward and turn the disc clockwise to lock. (I didn't use my disc and it worked just fine)
2. When inserting the bottom section of the tree into the assembled stand, thread the eye-bolt into the stand and tighten until the pole is firmly secure.

Separate branches according to color codes.

Shaping and Adding Branches:

1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work, or holding the branch in your hand with the hooked end pointing down. BEGIN WITH THE BRANCHES AT THE BOTTOM OF THE TREE AND WORK UP TOWARDS THE TOP.
2.When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start by wrapping the back tip around the end of the branch stem to cover the branch wire.
3. Working from the branch's hook moving outwards, fan each tip out using the pattern: one tip to the right of the branch's center wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire. Tips should be slightly offset from each other so that they do not line up exactly one behind the other. All tips should be curved upwards when looked at from the side.
4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket.

COLOR/CODES FROM BOTTOM TO TOP:

White (Short)
GREEN
BROWN
Pink
Black
Red
Yellow
Blue
White
Orange

TOP WITH TREE TOP (WITHOUT COLOR CODE)

4. (continued) As you finish each level of branches, make sure the rows look evenly distributed to the levels above and below it. Adjust tips as needed to even appearance. (If your tree includes branches with side wings, arrange these branches so that the wings are on every other branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do this by pulling down each row of tips in and even, circular pattern.
6. Start from the bottom layer of the tree topper and work upwards to the top tip.
7. Carefully curve each tip upwards for a natural look.
8. Insert top securely into tree's center pole.
9. Step back and take an overall look at the tree. Shift tips as needed to fill in any gaps. Slightly upsweep all branch tips for a uniform look. Your Christmas tree is now complete and ready to be decorated.

Location: Gwinnett
it's NOT ok to contact this poster with services or other commercial interests